Vai al contenuto

How to Fix Windows Activation Error 0XC004F213 on Windows 10/11

How to Fix Windows Activation Error 0XC004F213 on Windows 10 , 11

Several people have complained about Windows 10 deactivating automatically after installing an update or replacing hardware such as the motherboard. During this problem, people get the following error message: “Windows claimed that no product key was discovered 0xc004f213.” On This Case, Wee See How to Fix Windows Activation Error 0XC004F213 on Windows 10/11

0xc004f213 usually arises because Windows was unable to transmit the preloaded product key when upgrading a version. Furthermore, hardware replacement, glitches, and inconsistencies in licensing key identification might be explanations.

Table Of Contents:

 

 

Windows reported that no product key was found 0xc004f213

Here is How to Fix Windows reported that no product key was found 0xc004f213 –

1] Install Windows update if pending

This activation problem is a known Microsoft defect, and specialists are striving to find a solution. When you read and used this approach, the answer may have been made accessible to people through Windows update. Install any outstanding fixes first to resolve the issue. – 0xc004f213

  1. Click Start and type – updates.
  2. Hit – Enter and select – Check for updates.

How to Fix Windows Activation Error 0XC004F213 on Windows 10/11

  1. The update will be automatically downloaded and ask you to reboot the computer. So, click – Restart now.

2] Uninstall recently installed patch

Because the issue might be the result of a patch loaded on your PC, uninstall the update KB as a workaround. This activation issue usually appears when you apply a cumulative update. The fault is resolved after the update is deleted; thus, follow the following –

  1. Press Winkey and then type – update history.
  2. When a Settings page appears, click – Uninstall updates.
  3. A separate window from Control panel will prompt up; go to the Microsoft Windows section.
  4. Right-click on the most recently installed update and select – Uninstall.

Windows reported that no product key was found 0xc004f213

  1. A small pop-up will ask you for confirmation, click – Yes.
  2. Wait until the removal of the update as it may restart the system one or more times.
  3. Check if 0xc004f213 fault is fixed.

3] Use activation Troubleshooter

When you encounter the 0xc004f213 problem, the Activation Troubleshooter is the most beneficial tool. After you have done the update-related remedies listed above, you must now run this tool to resolve the no product key was discovered problem.

  1. Click the Search from taskbar.
  2. Type in – activation and hit the – Enter.
  3. After the Settings page appeared, select – Troubleshoot.
  4. Follow the guidelines showing on the activation troubleshooter wizard till the end.

4] Activate again using cmd command

When you encounter the 0xc004f213 problem, the Activation Troubleshooter is the most beneficial tool. After you have done the update-related remedies listed above, you must now run this tool to resolve the no product key was discovered problem.

  1. Click the link product_key and extract the downloaded file.
  2. Double click the product.vbs to see the product key of your system.
  3. Press the Win key and type activation.
  4. Hit Enter and activate using the key you have noted.

5] Make Sure the product key is valid and genuine

Everything failed to work in order to fix the aforesaid issue indicates that the digital license you are trying to use is not genuine. With the copy of Windows 10, a 25 character activation code is provided by any means subject to the mode of purchase. Use that key to fix the problem with the instructions below –

  1. Press – Win+I.
  2. Chose – Update & Security.
  3. Click the – Activation.
  4. Select – Activate and insert the code you got with the copy.

6] Buy an activation Key

Assume you replaced the motherboard and discovered that you had not established a Microsoft account prior to the repair. You can no longer use the Activation Troubleshooter to resolve error 0XC004F213. You now have two options for moving forward —

a. Fit the old motherboard replacing with the new one

Although you can get the product key back by reinstalling the old motherboard, this is not a practical solution. In this case, the only remaining alternative is to purchase a new digital license.

b. Buy a new digital license

Because your options have run out, you must buy a new license key from the Microsoft Store. Now, use the method –

  1. Hit Win+X and select Settings.
  2. Choose – Update & Security.
  3. Click “Activation” from the left and click – Activate.
  4. Paste the new product key to solve the 0XC004F213 error.

7] Contact a Microsoft support Agent

In case, you fail to solve the activation erroneousness then the last option is to contact a  Microsoft support agent. If necessary they can facilitate remote activation for the affected PC.

8] Check Date and time Settings

Incorrect date and time settings might potentially cause this issue to appear after installing a new update on Windows 10. The activation server cannot identify the proper computer if the incorrect choices are selected there. As a result, thoroughly study all of the settings and make any necessary changes before restarting your computer to determine whether the problem has been resolved.

  1. Press – Windows logo key.
  2. Select the Settings cog.
  3. Click – Time & Language.
  4. Go to the right pane of the subsequent settings page and see if the Time zone is accurate.
  5. Check the other settings and change as per your preferences.

9] Correct network problem

Windows said that no product key was discovered. 0xc004f213 may potentially display if your PC is experiencing network issues. Examine the internet access intermittency, which may prevent activation and display the error message. In this instance, the best remedy is to soft reset the router, which can be done by anybody.

  1. Power off the network adapter and wait for a minimum of 10 seconds of time.
  2. Switch on the adapter and then start activating.

 

You may sometimes get a Windows Activation error 0XC004F213 indicating that your Windows 11 or Windows 10 operating system is not activated. The notification reads, “Windows reported that no product key was identified on your device.” The error code is 0XC004F213.” Even if you use a legal product key or a preloaded operating system, this may happen. This problem may arise if the preinstalled key is missing, if the motherboard has been changed, or if there are several product keys. However, we have a few alternatives for you that may help you resolve the issue. Let’s see how things proceed.

 

Table of Contents

Method 1: By Finding the Preinstalled Product Key

 

Step 3: Now, press Win + R keys together on your keyboard to open the Run command.

Step 4: Type ms-settings:activation in the Run command search box and hit Enter.

 

Run Command Ms Settings Activation Enter

 

Step 5: It opens the Activation settings window. Go to the right side of the pane, scroll down and click on Change product key.

 

Activation Settings Right Side Change Product Key

 

Step 6: Now, type the product key (that you procured at Step 2) in the Product key field and click Next. Now, follow the instructions to complete the process.

 

Enter Product Key Next

 

If the product is authentic, then your Windows 10 OS should be activated and you should not see the Activation error anymore.

How to Find your Key: –

1 – If you have purchased Your windows OS from Microsoft store, then Open Microsoft store and Go to  Downloads > Product Keys > Subscription Page > Digital Content and find it there.

2 – If you have purchased it via Physical package, just find that package and find the key written inside the package.

3 – If your Windows Os has came prebuilt on your computer, you may find it on the back of the computer, located on a sticker.

4 – You can also view key via Powershell.

Step 1:  Search Powershell in Search box and then right click and Choose run as administrator.

Open Powershell Run As Admin Win11

 

 

Step 2: In the Windows PowerShell (Admin) window, execute the below command and press Enter:

 

wmic path softwarelicensingservice get OA3xOriginalProductKey

 

Windows Powershell (admin) Run Command To Check Original Product Key Enter

Method 2: By Running the Windows Activation Troubleshooter

 

Step 1: Press Win + R hotkey on your keyboard to open the Run command.

Step 2: In the Run command search field, type ms-settings:activation and press Enter.

 

Run Command Ms Settings Activation Enter

 

Step 3: In the Activation settings window, go to the right side of the pane, and under the Activate Windows , select Troubleshoot.

Step 4: Wait till the Troubleshooter completes the scan and if it detects any issues.

Step 5: If any issues detected, the troubleshooter will fix them automatically. Simply select Apply this fix and then follow the instructions to finish fixing the problem.

Now, restart your PC and the issue should be fixed now.

Method 3: If you have a Digital License

If you have a Digital License Linked with your PC, you can go ahead and simply sign in with a Microsoft Account linked with your Microsoft Account. It will automatically get activated.

To know whether your Key is activated on this PC.

1 – Search cmd in Windows search.

2 – Now, right click and run as admin.

Cmd Admin Min

3 -Now, run the command given below and hit enter key

slmgr /xpr

4 -Close the cmd window.

Method 4 – Using Generic key

Error 0xc004f213 may occur after upgrading to Windows 10 Pro, and your computer installed Windows 10 Enterprise instead of the Pro edition. This is a known bug.

1 – Disconnect your PC from the Internet.

2 –  Settings >  Update and Security > Activation > Change Product key option.

Enter this key: VK7JG-NPHTM-C97JM-9MPGT-3V66T (entering this generic product key will downgrade your PC from Enterprise edition to Pro).

Click on the Activate Product button.

3- Restart your computer.

If none of the above methods work, you may need to buy a new product key. If you did not have a Microsoft account before changing the motherboard, this should be done. You would not be able to utilize Method 2 in such instance. Alternately, you may remove the new motherboard and replace it with the old one to test if it works.

However, if the issue persists, your only choice is to contact a Microsoft representative.

 

How can I resolve Windows activation problem 0xC004F213?

I’ve been using my laptop with a digital license since Windows 10 was released, and everything seemed good until lately. I now get a message from Windows with the error number 0xC004F213. I tried reinstalling the operating system, but nothing changed; I still get the problem. Could you please assist me?

 

Many consumers were pleased when Microsoft offered a free upgrade[1] to Windows 10 provided they already had a valid license. When it was first released in 2015 (and, strangely, you can still update for free today), many people took advantage of the chance. This is when a digital license from a prior operating system version is utilized — it is deployed automatically, with no user action required.

Unfortunately, this causes various complications, one of which being activation error number 0xC004F213. Users reported receiving a message unexpectedly, albeit in most instances, this is due to a hardware[2] change in the most recent Windows update. 0xC004F012 is a similar error that users may face in similar situations.

Others reported seeing a 0xC004F213 issue during the Windows update procedure. Regardless of the conditions, the problem may also occur when using a product key for Windows 10 rather than a digital license. However, the issue is ubiquitous, since users in both circumstances get a message that reads:

Windows discovered that no product key was present on your device.
0xC004F213 is the error code.

Since the notice mentions the product key, many people who used the digital license are perplexed by this mistake since they never used it to activate Windows but rather utilized the free upgrade.

However, it is vital to understand that a digital license explains the activation mechanism, but it is not a license in and of itself – it cannot completely replace the product key. As a result, in order to resolve 0xC004F213, you must utilize the key that was used to activate your original copy of Windows OS.

How to fix Windows activation error 0xC004F213?

Some users reported that they also get additional errors when using Windows, such as Blue Screen of Death[3] crashes. If that is the case for you, it might be that Windows system files are corrupt, hence it can not correctly identify your license. Reimage can repair those corrupted files for you if you want a quick solution to this problem. Otherwise, refer to the fixes below.

Fix 1. Install all the available Windows updates

To repair damaged system, you have to purchase the licensed version of Reimage.

Make sure that all updates for your operating system are applied first:

  • Right-click on Start and pick Settings
  • Go to Update & Security section
  • Here, select Check for updates and wait
Update Windows
  • Choose to install everything available, including cumulative, security and optional updates
  • Once done, reboot your system.

Fix 2. Run activation troubleshooter

FIX IT NOW! 

To repair damaged system, you have to purchase the licensed version of Reimage.

Built-in troubleshooters can resolve many issues, including those that relate to licensing process.

  • Open Settings > Update & Security as explained above
  • Select Activation from the left menu
  • Below the error message, you should see several links you can click – choose Troubleshoot

Use activation troubleshooter

  • Proceed with on-screen instructions and apply the suggested fixes.

Fix 3. Use a built-in command in Command Prompt to check your key

FIX IT NOW! 

To repair damaged system, you have to purchase the licensed version of Reimage.

You can use the following commands to check what your activation key is (instructions for digital license).

  • Type cmd in Windows search
  • Right-click on Command Prompt and select Run as administrator
  • When User Account Control shows up, click Yes
  • Once Command Prompt opens, copy and paste the following command:

    slmgr /xpr

  • Press Enter.

Use Command Prompt to activate

If you are using a product key, use the following instructions instead:

  • Right-click on Start and pick PowerShell (Admin)
  • When the new window shows up, copy and paste the following command:

    wmic path softwarelicensingservice get OA3xOriginalProductKey

  • Press Enter.

With the key available, go to Settings > Updates & Security > Activation > Change Product key and enter it there.

Fix 4. Wait

FIX IT NOW! 

To repair damaged system, you have to purchase the licensed version of Reimage.

In some cases, Windows servers might be very busy. If you have just upgraded your operating system and the error 0xC004F213 showed up immediately, you should wait a few days in case the servers are down or busy. If that does not work, try applying other suggestions listed here.

Fix 5. Activate Windows via the local phone support

FIX IT NOW! 

To repair damaged system, you have to purchase the licensed version of Reimage.

If for some reason you are unable to activate Windows while you have your product key available, you can always contact your local Microsoft support branch. Here’s how:

  • Have your Windows product key ready
  • Press Win + R, type Slui 4 and press Enter
  • Select your country and click Next

Use phone activation

  • You will be provided with the local phone number – dial it
  • Proceed with instructions your are provided.

Repair your Errors automatically

 

Still having problems?
If you are unable to address your error using Reimage, please contact our support team. Please include any other information about your problem that you feel we should be aware of.

 

 

 

Reimage is a specialized Windows repair program. It will identify the problem with your machine. It will examine all System Files, DLLs, and Registry Keys that have been infected with malware.
This patented repair technique makes use of a database of 25 million components that may replace any damaged or missing file on the user’s PC.
You must purchase the licensed version of the Reimage virus eradication program to repair your machine.

 

 

 

Using a VPN, you may get access to geo-restricted video material.

Private Internet Access is a virtual private network (VPN) that allows you to remain completely anonymous while preventing your Internet Service Provider, the government, and other parties from monitoring your online activity. The application provides dedicated torrenting and streaming servers, ensuring optimal speed and preventing you from being slowed down. You may also bypass geo-restrictions and watch Netflix, BBC, Disney+, and other popular streaming services from anywhere.

Do not pay ransomware creators; instead, employ alternate data recovery methods.

Malware attacks, particularly ransomware, are the most dangerous to your images, videos, business, or school assets. Because fraudsters employ powerful encryption to lock data, it cannot be accessed unless a bitcoin ransom is paid. Rather of paying hackers, you should first investigate various data recovery processes that may assist you in recovering at least some of the lost data. Otherwise, you risk losing both your money and the data. One of the most effective ways for retrieving at least some encrypted data

 

If Our Method Resolve Your Problem Consider To Share This Post, You can help more People Facing This Problem and also, if you want, you can Subscribe at Our Youtube Channel as Well!